General=======1. Made "Erase configuration" checkbox always start as unchecked on each   start of UPStart2. Improved phase detection mechanism3. Added phase indication to device-to-device comm test in the two   device test dialog and in the VLE "by links" list.4. Modified Network Comm Test5. Improved VLE component reuse mechanism.6. Changed UPB ID tab to remove unnecessary data, group the options,   and add a user note section.7. Changed list view to reorder and eliminate some columns.8. Changed use of a "Are you sure" mechanism when programming a device   from a Verify "Make device match file" operation.9. When changing a device's room name and the display pane is showing the All   Devices display, the display no longer switches to the new room display.10. New "Use Visual Scheduler" option in the Tools - Options 1st tab11. New "Expand All" and "Collapse All" right click menu options    in the design pane when on the tree roots12. Added Library file support for PCS devices.  Improved speed of    adding "out of the box" PCS devices13. Made single-unit verify work with a multi-selection14. Several Export file construction problems fixed.15. Added "Find UPB Interface" button to the Interface Select dialogPCS Specific============1. Made simpler the Receive Components tab of the Input COntrol Module2. On device advanced tab for PCS devices with UPB version >=3, is now a   sensitivity low/high setting.3. For PIMs with manufacturer id PCS and UPBVersion >=3 now has a setting for   receiver sensitivity (low or high) available from the Settings button on the   interface select dialog.4. Eliminated the Tools - Options Repeater tab and moved its controls to a tab   on the SPR edit dialog.5. When using a Split phase repeater, changed enter setup, exit setup, enter   write mode, and exit write mode to use ACK messages to confirm.6. Added Average-Noise meter to Device comm test and device-to-device comm test   when working with a UPBVersion >= 3 device and/or a UPBVersion >=3 PIM.7. Added Average-Noise column to the device-to-device communication test results   when getting a GDS response from a UPB Version >= 3 device.8. Fixed minor problem with changing room and/or device name of a TEC and   the schedule for the TEC in the design pane not updating9. Added Receive Component Table Blink facilities for some PCS devices10. Added support for the Timed Shut-Off feature to the    WS1D, WS1E, WS1R, WS2D, LM1, AM1, FMR, LM2, OCM11. Added New Switch Trigger support  the LM112. Red/Blue LED color choices now used for all PCS products with    firmware version >= 5.47RCS Specific============1. Improved thermostat support to match current firmwareHAI Specific============1. Added support for IR options in HAI 6 button keypads with   firmware >= 1.022. Added support for new HAI device typesSAI Specific============1. Changes to UPStart wizard to allow configuring existing networks2. Added to UPStart wizard a popup when a device is added that can   be configured as dim or non-dim.3. Eliminated links 241-244 from the UPStart wizard4. Added to the UPStart wizard programming step an on-screen indication   if pending changes need to be programmed or not.